Ecocirc XLPLUS

High Efficiency Wet Rotor Circulators

Description

The new Lowara ecocirc XLplus are the wet rotor circulators that provide state-of-the-art technology in hydraulics, motors and intelligent controls. The purposefully engineered, easy-to-install units are designed with simplicity and efficiency in mind.

• High efficiency with different operation modes
• Automatic proportional pressure control (Δpv)
• Constant pressure control (Δpc)
• Differential temperature control (ΔpT)
• Manual set constant speed
• Night setback mode
• Easy to install and start up, no advanced programming necessary
• Clear display and easy setting with touch buttons
• For hot and cold media including tap hot water, geothermal and solar systems
• Communicate with Modbus RTU and BACnet systems
• Can be controlled from a laptop, tablet or smartphone via WiFi (optional module)

Single or twin (D) head model options are available.

Cast iron housing for water circulation in heating and air conditioning systems. Stainless steel (N) housing for hot water secondary circulation.

Pipe union or counterflange kits are available on request.

If you know the model you require, please call 01793 820142 for a quotation.

To have an Ecocirc XLPLUS model sized or to check suitability for your application, please call our technical team on 01793 820142.

Range Specification

Head up to

12.0 m

Flow up to

60.0 m3/h

Temperature Range

– 10°C to +110°C

Motor Rating

1x 230V

Port Size

G 1.5 to G 2

DN32 to DN80 Flanged

Length up to

360 mm

340 mm on stainless steel models