Supergen Brass Positive Twin | |
Quiet Running Shower Pumps | |
Description | |
Application : Suitable for boosting bathrooms, showers and wetrooms in domestic and commercial settings. A professional shower pump range with twin head impellers, robust brass construction and continuously rated induction motors. This increases the life of the pump and provides a low noise level. Supergen is produced in the UK for quiet, effective boosting. They are designed in the regenerative style which means that the pumps are more forgiving in an installation - they can handle hotter water, overcome air pockets and provide a highly efficient flow rate. The Supergen end casings are premium quality brass and uniquely machined to allow a smooth water flow around the impeller, reducing vibration and the associated noise level to a minimum. Supplied with four stainless steel braided flexibles with 22mm connections, 1.5m power cable and rubber feet for further noise absorption. Pre-wired and tested for optimum performance. The Supergen range is not suitable for use with pressurised cylinders, combination boilers or for connecting directly to the mains supply. The Supergen models below are suitable for positive twin head, gravity fed applications. Each pump is fitted with two flow switches that require 0.5 lpm to activate either the hot or cold side. If this minimum flow is not available, the Supergen Universal models are recommended. For sizing advice, please contact our office for assistance. |
Specification | ||||
Product Name | Supergen 60TX | Supergen 80TX | Supergen 121TX | |
Product Code | P0957 | P0960 | P0985 | |
Pump Type | Positive Twin | Positive Twin | Positive Twin | |
Max Pressure | 2.0 Bar | 3.0 Bar | 4.0 Bar | |
Typical Performance | 9 lpm at 1.5 Bar | 9 lpm at 2.0 Bar | 9 lpm at 3.0 Bar | |
Connection | 22 mm | 22 mm | 22 mm | |
Dimensions of Pump L x W x H (mm) | 245 x 145 x 225 | 258 x 145 x 225 | 271 x 145 x 225 |
Pump World © All Rights Reserved T: 01793 820142 W : www.pumpworld.co.uk E : enquiries@pumpworld.co.uk