Supergen Brass Universal Single | |
Quiet Running Shower Pumps | |
Description | |
Application : Suitable for boosting bathrooms, showers and wetrooms in domestic and commercial settings. A professional shower pump range with single head impeller, robust brass construction and continuously rated induction motors. This increases the life of the pump and provides a low noise level. Supergen is produced in the UK for quiet, effective boosting. They are designed in the regenerative style which means that the pumps are more forgiving in an installation - they can handle hotter water, overcome air pockets and provide a highly efficient flow rate. The Supergen end casings are premium quality brass and uniquely machined to allow a smooth water flow around the impeller, reducing vibration and the associated noise level to a minimum. Supplied with two stainless steel braided flexibles with 22mm connections, 1.5m power cable and rubber feet for further noise absorption. Pre-wired and tested for optimum performance. The Supergen range is not suitable for use with pressurised cylinders, combination boilers or for connecting directly to the mains supply. The Supergen models below are suitable for universal single head, gravity fed applications. Each pump is fitted with one pressure switch, one flow switch and one pressure vessel. For sizing advice, please contact our office for assistance. |
Specification | ||||
Product Name | Supergen N21SX | Supergen N37SX | ||
Product Code | P4100 | P4200 | ||
Pump Type | Universal Single | Universal Single | ||
Max Pressure | 2.0 Bar | 3.0 Bar | ||
Typical Performance | 9 lpm at 1.5 Bar | 9 lpm at 2.1 Bar | ||
Connection | 22 mm | 22 mm | ||
Dimensions of Pump L x W x H (mm) | 195 x 225 x 283 | 196 x 225 x 283 |
Pump World © All Rights Reserved T: 01793 820142 W : www.pumpworld.co.uk E : enquiries@pumpworld.co.uk