Basepack | |
Packaged Break Tank Booster Set CAT5 | |
Description | |
Application : Designed to comply with the Water Supply (Water Fittings) Regulation 1999 and supplied as a complete package mounted on a base plate suitable for providing potable water. Each package is completely assembled and wired to minimise the time taken on site for installation, this is especially important when the set is replacing an existing unit where down time must be kept to an absolute minimum and disruption avoided. Each set has a type AB air gap which provides backflow protection to fluid Category 5. The GRP tank is WRAS approved, pre-insulated and supplied with ball valve and float, weir slot overflow, drain valve and low level float switch. Suitable for domestic building services, commercial building services and industrial applications. For sizing advice, please contact our office for assistance. |
Specification | ||||
Product Name | Basepack 8 | |||
Product Code | PT2630 | |||
Max Head | 6.6 Bar | |||
Max Flow | 140 lpm | |||
Tank Size | 250 Litre | |||
Air Gap | CAT5 AB | |||
Dimensions L x W x H mm | 1091 x 800 x 875 |
Pump World © All Rights Reserved T: 01793 820142 W : www.pumpworld.co.uk E : enquiries@pumpworld.co.uk